Robot-making process [7] - chest

[Robot Making 7]


The chest of the robot is also an important part that guards the micro controller and the battery. In addition, it affects the overall impression of the humanoid greatly just as the head does.





For the assembling of the part, its plane figure as below is needed first.

You should mold it like this, which is quite a difficult work.

After that, the chest figure should be attached to the upper part of the robot, which is already assembled. In doing so, the lower part of the chest should run parallel with the jutting part of the waist.

Top view of the humanoid. A Li-poly battery will be put into the hall in the middle.