Robot-making process [2] leg

[Robot Making - 2]

Now, the legs are going to be assembled and combined to the feet. Even though it seems to be an easy work, you should be very careful to make both legs are exactly the same in height. Otherwise the robot will be physically handicapped, or even disabled.

To begin with, bend the aluminium plane(of leg), and join it to the motor by bolts as in the pictures below.

Then, the leg should be combined with the foot. The picture below shows some washers which the two parts can be assembled with.

With the other part made in the same way

The legs are complete. You may noticed, however, that the legs above are somewhat different to the ones shown in the original sketch. In fact, the process I am going through now is a 'robot-making process', and after that, there will be 'armor-building process' through which the robot's armor and ornaments are made.