Robot-making process [1] foot

[Robot Making - 1]



The first step to make the robot is to assemble the foot. To do this, you need the aluminium plane figure of it, two motors, wires, and plastic combiners as below.





First, bend the aluminium plate with a vise as shown in the picture.

One of the plastic combiners needs to be cut to fit in.

The motors are put together after connected by wires. A nut should be put into the hole of the cut element before it is combined to the motors as shown in the picture.


The motor parts complete


Then, using bolts, combine the aluminium part and the motor parts as below.

The other foot assembled in the same way

Now, the foot-parts are finished.