[Robot Armor 2] Waist

Let's make the robot belt and guard.

First of all, bend 1T aluminium plane like the picture below, and attach 0.2T plane to the both side of it with epoxy adhesive.

Use masking tape(rather than adhesive one) and a rubber band to prevent leaking.

Then, make a belt with 1T plane like this.

The figure of the back cover made of 1T aluminium

Combine the belt and the back cover with bolts and nuts.

Now, attach the ornament already made to the belt with epoxy adhesive.

Next, we make the front and side guards with 0.2T aluminium plane.

After assembling the guards to the belt(using iron clip-hinge), attach the belt to the robot waist as shown in the picture below.